Splash! Semi Portable Aquatic Hoist
(DDA, ADA and Equality Act Compliant)

Splash!  Semi Portable Aquatic Hoist





The Splash! Aquatic Hoist is a semi-portable hoisting system designed for swimming facilities seeking to provide user-friendly access to their swimming pools. The Splash! is battery powered and operated by a screw driven actuator. The design and durability of the system ensures consistent operation and minimizes service problems.

The Splash! hoist is attached to the pool deck using a company provided square deck anchor, similar to those used for starting blocks or backstroke flag stanchions.

The Splash! is virtually maintenance free. The components are made from corrosion-resistant materials, including powder-coated aluminum (arms), and powder-coated stainless steel (base, mast, and seat frame). The unique seat of the hoist was specifically designed to provide the user with the greatest possible safety, comfort and ease of transfer. The hand control is completely waterproof, and allows either the user or the attendant to control its operation with ease. The control box and battery are water resistant and should be protected from long exposure to the water. A small, waterproof cover is included with each hoist to cover the control box when the system is in use. If the hoist is used outdoors, an optional full cover is available for purchase and is recommended to use to protect the system. Pricing includes a footrest.

We request a Pool Deck Profile Worksheet with each order so that the hoist can be engineered to match the each customer’s specific pool specifications.

The Splash! Semi Portable Aquatic Hoist is available in the following models:

  • Splash! – Standard Splash! hoist provides 400lb hoisting capacity. Mounted to deck with company supplied square anchor socket

  • Splash! Spa - Designed for use with spas up to 48" (122cm) above the deck

  • Splash! Hi/Lo – The perfect hoist for facilities that have an above ground spa and an in-ground pool. The dual position chair allows a single hoist to be used in both locations

  • Splash! Extended Reach – For use with pools with unusual gutter configurations requiring a longer reach to the water line

Splash! Accessories:

Stability Vest

Stability Vest
The Stability Vest was designed to facilitate the transfer of individuals with limited or no idependent upper body or trunk stability. The vest attaches the user to the chair, strapping them in for support.

To download and watch a video on how to use the Stability Vest, please click here. (Quicktime video, 7.6 mb)

Detachable Armrests

Arm Rests
Optional, flip-up armrests are available for all hoists. This accessory item can be retrofitted to a hoist after it has been delivered. The armrests are available in white, for PAL and Splash models, and in gray, for the aXs.

Seat Pad

Seat Pad
White, waterproof seat pad designed to enhance comfort and minimize potential skin damage that could occur during transfer is available as an optional accessory.

Spine Board Lifting Frame

Spine Board Lifting Frame
The Spine Board Lifting Frame works with any standard spine board (not included). Simply remove the chair assembly by pulling the attachment pin and replace that assembly with the Spine Board Lifting Frame. One person can easily extract an injured swimmer from a pool, keeping the injured person fully supine during the procedure.

Splash!  Custom Cover

Splash! Total Cover
Protect your investment with a full, all-weather cover, made from Solution Dyed Polyester. 

Splash!  Custom Cover

Mast Cover for Splash!
Protect your mast assembly with a full, all-weather cover, made from Solution Dyed Polyester.

PAL All-weather cover

Splash! Battery Console Cover
Made of Solution Dyed Polyester

Splash!  Caddie

Splash! Caddy
The Splash! Caddy facilitates handling, transporting and storing a Splash! aquatic hoist. Fabricated from rugged steel for strength and powder-coated for appearance, the Splash! Caddy helps to protect both your investment and your staff. The Caddy simplifies both insertion and removal of the connector shaft into the insert in the pool deck and becomes a convenient storage rack for the hoist when not in use.

To download and watch a video on how to use the Caddy, please click here. (Quicktime movie, 2.9 mb)

Square Deck Anchor

Square Deck Anchor
Company provided square deck anchor is included with each hoist and is used for mounting all Splash! hoists. The cap covers the opening in the anchor when the hoist is not in place.

Battery

Battery & Charger

All pool hoists manufactured by RehaMed International are powered by a 24 volt, rechargeable battery. This is a lead acid battery that should be left on the charger when not in use. It is IMPORTANT that the battery not be allowed to fully discharge, as this could damage the battery. The best practice is to make it a rule to put the battery on the charger each evening. If the hoist is being stored for the winter, leave the battery on the charger all winter. You cannot overcharge the battery.

The charger connects to the port located on the same side of the battery as the control box connection.