aXs, PAL, and Splash Accessories:


Battery & Charger

All pool hoists manufactured by RehaMed International are powered by a 24 volt, rechargeable battery. This is a lead acid battery that should be left on the charger when not in use. It is IMPORTANT that the battery not be allowed to fully discharge, as this could damage the battery. The best practice is to make it a rule to put the battery on the charger each evening. If the hoist is being stored for the winter, leave the battery on the charger all winter. You cannot overcharge the battery.

The charger connects to the port located on the same side of the battery as the control box connection.

Stability Vest

Stability Vest
The Stability Vest was designed to facilitate the transfer of individuals with limited or no idependent upper body or trunk stability. The vest attaches the user to the chair, strapping them in for support.

To download and watch a video on how to use the Stability Vest, please click here. (Quicktime video, 7.6 mb)

Detachable Armrests

Arm Rests
Optional, flip-up armrests are available for all hoists. This accessory item can be retrofitted to a hoist after it has been delivered. The armrests are available in white, for PAL and Splash models, and in gray, for the aXs.

Seat Pad

Seat Pad
White, waterproof seat pad designed to enhance comfort and minimize potential skin damage that could occur during transfer is available as an optional accessory.

Spine Board Lifting Frame

Spine Board Lifting Frame
The Spine Board Lifting Frame works with any standard spine board (not included). Simply remove the chair assembly by pulling the attachment pin and replace that assembly with the Spine Board Lifting Frame. One person can easily extract an injured swimmer from a pool, keeping the injured person fully supine during the procedure.

PAL All-weather cover Splash! Cover

aXs Cover

Custom Covers for PAL, Splash!, and aXs Models
Protect your investment with a full, all-weather cover, made from Solution Dyed Polyester. Available for PAL, Splash!, and aXs models.
PAL All-weather cover Splash! Battery Cover

Battery Console Covers for PAL and Splash! Models
Made of Solution Dyed Polyester

Splash!  Caddie

Splash! Caddy
The Splash! Caddy facilitates handling, transporting and storing a Splash! aquatic hoist. Fabricated from rugged steel for strength and powder-coated for appearance, the Splash! Caddy helps to protect both your investment and your staff. The Caddy simplifies both insertion and removal of the connector shaft into the insert in the pool deck and becomes a convenient storage rack for the hoist when not in use.

To download and watch a video on how to use the Caddy, please click here. (Quicktime movie, 2.9 mb)